So the auto-start-stop system can be used without any concerns in modern turbo engines, the manufacturers wouldn’t have put it in if there was any.
Is auto start stop bad for engine?
The stop-start system aims to reduce emissions and the rate of fuel consumption. Resumption of the engine occurs with the engagement of the transmission and brake release or when the driver accelerates. If you are wondering is auto start stop bad for engine, here is your answer Auto start-stop is bad for the engine, especially in constant use.
Does automatic start wear out the starter motor?
There is no proof automatic start/stop wears out the starter motor or other engine parts faster than usual. The system only runs when the engine is hot and therefore when the engine is very easy to start. Some engines also start almost exclusively with compression.
What effect does start-stop technology have on engine life?
It’s designed to save fuel and reduce emissions, but what effect does the technology have on engine life? Start-stop technology can give benefits to the fuel economy from internal combustion engines in urban situations, while reducing emissions in heavy traffic. But will the durability of engines be affected in the long term?
How does auto-start/stop work?
When the driver lets off of the brake pedal, a fuel injector in one of the cylinders fires, igniting a spark plug, causing the engine to start with the help of combustion, rather than wearing out the electric starter motor. Still, you will find plenty of people online telling you how damaging Auto-Start/Stop is for the engine.
Why should you allow a turbo to idle?
Idling the engine cools the turbo because it circulates the oil, yet does not make the turbo “work.” The amount of cooling it needs is directly related to the way you just finished driving it. When you drive it gently around town, 15 seconds should be more than adequate. When you drive the car hard ie.
Should I idle and cool down my turbocharged engine?
You should idle and cool down your turbocharged engine because the oil in the bearing shaft can easily get burnt, and the residue can cause the turbo engine to fail. The other parts of the engine could also get damaged because the engine did not cool properly before the switch off.
What happens to your engine when you idle it?
Once your vehicle is idle, everything in the engine keeps running but not as much as it will when you move or accelerate. The turbo’s activity has also reduced drastically, which means less heat is generated. Now, the engine parts can easily cool down while still running. In addition, the oil keeps moving and cannot be easily burnt.
What can cause a turbo to fail?
There’s also the issue of heat soak from exhaust gas. The worst thing you can do to your turbo is switch the engine off immediately after a hard run. “The number one cause of turbo failure is oil “coking”.
Do turbo engines get hot?
Usually, turbo engines do not get too hot that it requires you to cool them down intentionally. However, this does not dispute that the turbocharged engine can get hot, especially when used under intense conditions. To be safe, you should idle your turbo engine for at least 15 seconds, even when used under usual driving conditions.
