Here’s how:
- Check Tread Depth. → All tyres, car or bike, lose a certain amount of tread rubber after their daily usage. Over time and exhaustion, the tread wears down to the accepted minimum level. …
- Check Sidewall. → Just adjacent to the tread is the sidewall of a tyre. …
- Check For Uneven Wear.
- How do I know how old my tyres are?
- If the tyres were original equipment on the vehicle, you should also follow the vehicle manufacturer’s tyre replacement recommendations when specified. If the tyre was manufactured after the year 2000, then you can determine its age by looking at the last four digits of this number. These represent the week the tyre was made, followed by the year.
- How do I know if my tires are out of balance?
- All tires have tread wear indicators built-in, but if the tread looks low take time to do the penny test on the tires. If you’re experiencing a vibration (particularly if it just started), or high (and increasing) levels of tire noise it may be a sign your tires are out of balance, not wearing properly or have a structural issue.
- How to extend tire life?
- Another way to extend tire life is to keep up with the proper maintenance of a vehicle and its tires. A couple of things you can do yourself are to check the air pressure and tread depth.
- How do I know if my tires have a warranty?
- To obtain an accurate tread depth for your current tires, you’ll need to use a tread depth gauge. Measure current tread depth and select matching amount. Look up the guaranteed amount of mileage from your tire manufacturer in the tire warranty. Not all tires have a warranty, but most will have one.
How do I know if my tyres need replacing?
Just take a 20p coin and insert it into the tread grooves on the tyre. If you can’t see the outer band on the coin, your tyres are above the legal limit. However, if you can see the band and that section of the coin is still visible, your tyres could be unsafe and require professional inspection by a mechanic.
- How do I know if I need to replace my tires?
- If you notice tire vibrations along with other tire damage indicators like abnormal bulges and irregular tread wear, you probably have to replace your tire. If you notice that your tires are cupped—meaning they have a cupped or scalloped appearance around the tire—they likely aren’t being rotated enough.
- When should I replace my tires?
- Generally, there are two different factors that impact when to replace tires: wear and age. Tire Wear: All tires eventually begin to experience wear. How the tire wears can be a indication of an issue with your alignment or tire pressure. Tire tread should wear evenly across the whole tire rather than on the inside or outside of the tire.
- How do you know if a tire is unsafe?
- Tread Wear. A tire’s tread depth is measured in 32nds of an inch. New tires have from 9/32” to 11/32” of tread material. A tire is considered unsafe when the tread is worn down to 2/32”. You can identify the tread depth to replace tires by using the penny test method or a tread depth gauge.
- How do I look after my tyres?
- Maintaining the correct inflation pressure is one of the most important things you can do to look after your tyres. A correctly inflated tyre should wear evenly across the tread, but one that’s incorrectly inflated will wear unevenly.
