The numeric load index code 112 represents the maximum load carrying capacity for single wheel use and 109 represents maximum load carrying capacity for the dual wheel use. The first number 112 denotes a tire’s ability to carry approximately 2,470 lb (1120 kg).
- What is a tire speed rating code?
- A chart denoting tire speed rating codes is an essential reference when buying new wheels for your automobile. The speed rating is denoted by an alphabet placed to the immediate right of the load rating, towards the end of a tire’s sidewall code. For example, in the code – P215/60R16 100H, H denotes the speed rating and 100 is its load rating.
- What is a V rated tire?
- Here, the tire would have a speed rating of V. V-rated tires can be driven at 149 MPH. Tires having a maximum speed capability over 149 MPH may have “ZR” in the size designation. Tires with a maximum speed capability over 186 MPH are required to include “ZR” in the designation. Below are examples of tire sizes with a “ZR” speed rating.
- How much weight can a 117 pound tire handle?
- Instead, you need to reference a chart that shows you what the load index rating means. As an example, a load capability of 117 means that the tire can handle 2,833 pounds of weight. Most passenger vehicles use load indexes ranging from 70–125. See load index chart 7. Speed Rating
- What does 91 mean on a tyre?
- 91 – This is the load index, or the maximum carrying capacity of each individual tyre (provided that the inflation pressure is correct). In our case we have a capacity of a little under 500 kg. The weight that a rear tyre can handle is indicated in pounds. H – Finally we have the speed index.
Which is better V or H speed rating?
The major difference between speed rating tires H and V is the tempo. An H tire’s maximum pace operating under favorable circumstances is approximately 130 mph. In contrast, a V-rated tire’s top velocity is slightly faster than an H-rated tire, around 149 mph.
- What is the difference between H and V ratings?
- The main difference between H and V ratings is the tempo. An H tire’s maximum pace operating is about 130 mph under favorable circumstances. In contrast, a V-rated tire’s top speed is slightly faster than an H-rated tire, around 149 mph. It is the highest-speed wheel that can operate before degradation appears.
- What is the difference between V and H tires?
- The key takeaway here is that V is a higher speed rating than H. The former can safely travel up to 149mph, while the latter tops out at 130mph. Any more than that, then it will be unsafe to do so. When buying tires, pay attention to the speed rating, as that’s going to be the safe top speed you can reach with your car.
- What is the highest speed rating?
- When the speed rating system was first developed, the highest speed rating was the unlimited “V” rating. This was for tires whose maximum sustained speed was 149 mph (240 kph) or more.
- What does a V rating mean on a tire?
- A higher speed value (in this case, a V-rating) typically signifies greater control and handling at higher speeds, as well as the tire’s ability to withstand the added heat. Tires with greater speed ratings, on average, manage better at slower speeds. Do H Or V Rated Tires Last Longer?
What are 35 tires?
Usually, the 35-inch tires are designed for more giant trucks and vehicles and rough terrain use. Thanks to their design, these tires are not as noisy as the regular tires. Additionally, they offer durability like 50,000-70,000 miles as opposed to an average of 40,000 miles.
- What is a 35” tire?
- The 35” is a metric value and refers to the width of the tire multiplied by the aspect ratio, which is the height of the sidewall, x2 because there are two sidewalls per tire, divided by the wheel inch, plus the wheel size… Phew!!! That’s a mouthful and a lot to digest at once so let’s break it down into a simple formula.
- Are 315 wide tires the same as 35 inch tires?
- YES, 315 wide tires are the same as 35” tires although 315 is the tread width in millimeters and 35″ is the tire diameter. 315/70/17 is usually the accepted metric equivalent size for standard/imperial 35-inch tires. 17.36″ + 17″ wheel = 34.36″ approximate tire diameter.
- What size is a 35×12-20 tire?
- It might say it is a 35X12.50-20, but the actual diameter noted in the specs is 34.6″. The chart below should give you a good idea for the various tire size equivalents for popular truck sizes. Tirebuyer has one of the largest selections of All Terrain and Mud Terrain tires in stock ready to ship fast and free.
- What’s the difference between a 35 and a 33?
- 1. The 35 has a substantially larger circumference which allows it to climb over a rock easier than a 33. This is once of the biggest advantages IMO. 2. You can run lower pressures and still have reasonably good clearance. 3. Your foot print is a lot bigger, lower pressure, more tyre in contact with the ground = more traction.
